Four Nozzles Stator Needle Winding Machine For 4 Poles Shaded BLDC
Motor
The winding machine WIND-1A-TSM is suitable for 4 poles shaded pole
motor to do winding.
Accordingly to stator winding way, different types of needle
winding machine can have one ,
two , three,four needles
For 4 poles stator, we usually suggest customer with 4needles
winding machine WIND-1A-TSM,
it can get the stator fast even there will be 4pcs begining wire
and 4pcs ending wire needed to be
connected,
The needle is driven by cam device rotation which drive the winding
spindle,
The machine WIND-1A-TSM major electrical parts such as Mitsubishi
PLC, Embedded human - machine
interface, Airtac cylinder and so on have CE mark,
and we exported to Europe company such as France, Romania and so
on,
May I know the reason that you'd prefer 1 needle or 2 needes, is it
because of the bridge wire showed on
photo?
Basic machine type WIND-1-TSM with 1 needle is for production of
prototypes of stators with small
quantity,
It can wind the slot one by one, and you may need to put the bridge
wire by hand if you use the type
WIND-1-TSM as your stator insulation cap interfre the machine place
bridge wire automatically,
The poles of shaded pole induction motor consist of 4 slots, which
are cut across the laminations.
The smaller part of the slotted pole is short-circuited with the
help of a coil.
The coils are made up of
copper wire and it is highly inductive in nature. This coil is known as
shading coil. The part of the pole
Wind Automation also provides customer with customized service, if
stator beyond the specification listed blow.
(1)Specification
| Wire diameter | 0.08~1.00mm |
| Stator ID | 15~65mm |
| Stack length | 7~90mm |
| Turn No. | 0~9999 |
| Movement | Stepping/Auto |
| Slot number | 4 (customized) |
| Air source | 5~7kg/cm3 |
| Power | 2KW |
| Power supply | AC 220 V, 50/60HZ |
| Weight | 450KG |
| Dimension | 1550x900x1450mm |
(2)Application
Suitable for 4 poles shaded pole motor to do winding.
(3)Machine configuration
Mitsubishi PLC
Touch screen
AIRTAC cylinder
High-power stepping motor
Lubrication system
4 sets auto wire clamping and cutting system
(4)Features
High speed needle winding
fully programmable operation
High quality level of the needle winding process
Depending on the customer`s specifications.
Automatic winding, indexing, layering and terminating
Quick change-over of tooling
Automatic stator needle winding machine application
| Four poles shaded motor stator winding |
Nozzle 4pcs
| 4 poles wind at same time at 400rmp, There will be 4 staring wires and 4 terminal wires, For turns no 750, wire diameter SWG35, 0.2mm, shaded pole stator, the cycle time is 2minutes
|
4 ploles stator needle winding |
Dedicated machine for 4 poles shaded motor
stator winding
|
Advantages:
1. Wind 4 slots per time, fast
2. Automatic winding, automatic cutting four poles per time
3. 4 Sets automatic clamp and cut wire device, wind shaded pole motor
4slots at same time,
and cut wires automatically
which has the coil is called the shaded part and the other part of
the pole is called unshaded part.
Motor winding machine manufacturer sample needed:
1. Stator stack samples each 5pcs
2. Copper wire gauge each 1roll
3. Stator lamination drawing and winding drawing
Please click below picture to view video
