Ball Bearing 6203 6304 Press To Armature Rotor By China Hydraulic
Device WIND-STY10
Application:
Press ball bearing to armature (rotor)
Advantages:
1. The ball bearing can be both sides or single side
2. Hydraulic press have constant pressure for place ball bearing in
right place
3. With pressure detection device
Parameter:
Custom made machine
This interface mainly displays the running status and alarm prompts
1) Total output and Shift output
The cumulative output mainly records the total amount of products
produced since the machine is put into operation, and cannot be
reset.
The shift output is the output produced on duty, and the output can
be reset to zero the next day after the shift.
2) Pressed actual position and pressed to setted position
The pressed actual position refers to the specific position where
the bearing is pressed into the rotor shaft, which is the current
coordinate point of the value grating ruler.
The pressed to setted position is the set target value of the
bearing press-fit.
3) Pressure time
Pressure time is the delay time (maximum 9.9) before the cylinder
returns after the bearing is pressed into the target position.
4) One rotor time
One rotor time is the time from pressing the start button to
finishing the product
5) Step/Auto & Lighting
Step/Auto refers to the current running state,
Auto is to press to start and automatically press to the end.
If in Step state, the machine will run step by step by pressing
both hands.
The lighting is automatically turned on after entering the running
interface, this screen can switch the lighting switch
1) Parameter number and Parameter name
| The Parameter number refers to the number of the parameter to be
set, and the Parameter name is the name of the corresponding
parameter number. For example (parameter number is 0, parameter
name is 500.000 and cannot be set to letters) After setting the
parameter number and the corresponding name, you can directly input
the related parameter number to use for according rotor.
|
2) Cylinder position and Reset grating ruler
| The oil cylinder position refers to the displayed value of the
current position of the grating ruler. The Reset grating ruler means the current position of the grating
scale is reset to 0.
|
3) Cylinder fast forward and Cylinder slow forward and Cylinder
rewind
| Cylinder fast forward and Cylinder slow forward is the position
where the oil cylinder changes from fast to slow speed during the pressing process of the
oil cylinder. Cylinder rewind is pressed to the setting end point of the grating
ruler
|
Below information are needed when you send inquiry:
1. The bearing size such as 6203,6304 and so on
2. The pressure of bearing
3. Rotor drawing with bearing location on rotor
Operation instruction video links
The press WIND-STY10 before shipment in the year 2021 (repeated
order of some motor manufacturer)
the press machine cycle time (20s'/pc for the biggest shaft stroke
rotor)
and setup video for changing fixture,
https://youtu.be/5sfHF_YvEhk
https://youtu.be/PhhHLgGI_Go
For reference of press WIND-STY10 in the year 2017
1)Video for machine demo
https://youtu.be/iL6HfHQiqGg
2)Simple instruction
https://youtu.be/kGubPingIyI
3)The video https://youtu.be/7QeVJvbIF8c
is just demo for how to set up position when you have to change
tooling,
You put on ball bearing and rotors, then press the button with both
hands,
then the ball bearing were pressed
