Armature Tester DC Resistance Inductance Surge Isolation Hi-Pot
Rotation WIND-ATS
Armature testing machine WIND-ATS-300
(1) Test Items
This armature testing machine test the bar-bar resistance, welding
resistance, dielectric strength(Hi-pot),
insulation resistance and turn-turn insulation,the test items can
be showed all on screen,
Or you can select one item and show it individually,
The loading and testing mode could be shifted by sliding the safety
cover.
The testing panel starts testing once the safety cover being slid
upon the working station.
| WIND-ATS-310 | Number of bars :≤36 |
| Test items | Test Description | Test results |
Bar to Bar resistance | 0.001Ω-1000Ω | ≤±0.5%Full scale |
| Automatic environment temperature compensation |
Welding resistance |
0.001mΩ-10mΩ |
±10μΩ |
180 resistance | 0.01Ω-1000Ω Automatic environment temperature compensation | ≤±0.5%Full scale |
Surge |
100-3000Vpp |
±2.0% |
Isolation resistance | DC 500V/1000V | 1-1000MΩ |
| ±2.5% Full scale |
| Hi-pot | AC 100-3000V | 0.1~10mA |
Screen content as First photo (your machine screen will be in
English)
Test items similar as armature testing machine for starter
WIND-ATS-02 as below Second down
(2) Machine Units
Control : Industrial Embedded System with 15'' Touch screen
Relay:Japan Panasonic or Tyco
High voltage relay:Toward
Pneumatic parts: Airtac
Power supply: Meanwell
Power: AC220V ±10% @60Hz , Air pressure: 0.4-0.6Mpa, Temperature:
0-45℃
(3) Statistical function
The testing machine automatically saves the test data of each
product,
and can be externally read through the USB interface
Statistics interface display content:
1.Total number of armature tested.
2.Number of qualified products (Passing rate).
3.The number of unqualified products (the rate of unqualified
productsthe items that failed in each test can be counted
separately)
(4) Optional functions( additional cost is needed)
1. Reading of barcode or QR code
The serial number of the tested product can be read according to
the barcode or QR code type format determined by the customer, so
that the product serial number corresponds to the product test data
one-to-one.
2. Laser marking device, coding device or label printing
It can be connected with the equipment to configure marking device,
coding device or label printing to mark and identify the qualified
or unqualified products after the test.
3. Unqualified NG product stack
It is used to store unqualified NG products after testing. The
operator must put the unqualified products tested to the designated
location before the equipment can start the next test. Avoid
misplacement of products.
4. Automatic assembly line coordination
It is used to cooperate with the IO control and communication
control of the automated assembly line to facilitate independent
integration to complete the needs of overall automated production.
5. Database function
After networking, the test data can be automatically uploaded to
the server and saved in EXCEL format. The two-dimensional code
scanning system is integrated, that is, the two-dimensional code on
the motor is scanned before the motor test starts. The
two-dimensional code corresponds to the test data of the motor one
by one for easy tracing
(5) Machine advanages
a. All the test items are judged automatically by the equipment,
which eliminates the disadvantages of the
traditional test methods, which are determined manually by the
product.
b. Quickly and accurately determine defects in the production
process of winding, assembly, and welding
of the motor, and indicate the location of the fault, which is
convenient for the operator to repair the
defective product.
c.The voltage of the device's high voltage test is automatically
adjusted and generated,
stable and convenient.
